Pro-Tech | Router Bit Tongue & Groove Assembly 3/8 X 1/4" 1/4" Shank Type_Hand Tools 300r/min Dimensions (LxWxH) and Net

300r/min Dimensions (LxWxH) and Net weight

Faster than a chisel by hand

4mm / 25mm No load speed (r/min)

veneering and finger-jointing processes

6kPa (water column: 360mmH2O) Dimensions (LxWxH)

Pro-Tech | Router Bit Tongue & Groove Assembly 3/8 X 1/4" 1/4" Shank Type_Hand Tools 300r/min Dimensions (LxWxH) and Net3 8X1 4" with a 1 4" diameter shank The cutter is fitted with 2 bearing guides to assist with alignment and initial setup Material up to 19mm thick can easily be joined Care should be taken when working with end grain. A sacrificial off cut piece of wood should be placed behind the wood to be cut to prevent tear out CAUTION: This bit is designed to be used in a router table