Tork Craft | Annular Hole Cutter HSS 32 X 55mm Broach Slugger Bit Accud_Micrometer Depth stop 2 607 002

Depth stop 2 607 002 585

For frequent use

Or you can build your own by buying just a body only and head of your choice

a radiused leather honing wheel

Working edges of the blades are lapped which further enhances accuracy

Tork Craft | Annular Hole Cutter HSS 32 X 55mm Broach Slugger Bit Accud_Micrometer Depth stop 2 607 002Annular Hole Cutter HSS 32 X 55mm Broach Slugger Bit One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these