Small Ondulator Corrugating Rolling Mill With 4 Sizes Prop 65 - Lead-Nickel At 3-1/2" long and 1"

At 3-1/2" long and 1" in diameter

Use light pressure and let the abrasive do the work to extend disc life and maintain control

depending on the sourcing of recycled Asian Padauk — but regardless of shade

231 – Busch Carbide Circular Saw Fig 231F

the Maestro EX is lighter at 3

Small Ondulator Corrugating Rolling Mill With 4 Sizes Prop 65 - Lead-Nickel At 3-1/2" long and 1"This smaller corrugating rolling mill also known as an ondulator is a simple, direct drive mill designed for adding a corrugated effect to thin gauges of soft metal sheet. It is used primarily for corrugating thin bezel wire and decorative sheet work. The mill must be mounted in a vise or attached securely to a workbench before use. For use with soft precious metal sheet up to 24mm wide. Best results are achieved with 30 gauge (0. 25mm 0. 010") sheet.