EK USA One Hander RFID Blocking Badge Holder with Detachable Lanyard (10983) End_Fitting_Strap Clip The lanyard is 19" (482mm)

The lanyard is 19" (482mm) with a safety breakaway connector at the neck that snaps apart under force to prevent injury and pushes back together

The holder can be worn with either section facing forward

Size = 2 1/8" x 3 13/16"

The lanyard is 17" (431mm) and rests just below the chest

Popular with law enforcement

EK USA One Hander RFID Blocking Badge Holder with Detachable Lanyard (10983) End_Fitting_Strap Clip The lanyard is 19" (482mm)The EK USA One Hander (10983) is a dual badge holder with one section on each side. The one hander section has a spring loaded clear cover with RFID blocking. The badge is mounted to the cover. Push the cover open with one hand to present the badge for scanning without removing the card; it springs closed automatically to re engage RFID blocking. The opposite section is open faced and non RFID blocking, holding a second badge without a cover.