2072 ROUNDOVER & EDGE TRIM 1/2" Shank which are fastened securely to

which are fastened securely to the stationary tool

a 5/8" x 22-1/2" Roughing Gouge and a 3/8" x 19" Spingle Gouge

You can install and remove our insert rings with a quick turn of our two-prong insert ring wrench

Just set your desired pressure by turning the thumbscrew for more or less pressure

One part is laid flat on the tabletop and fed across the cutter

2072 ROUNDOVER & EDGE TRIM 1/2" Shank which are fastened securely to1 2"SH, 1 4"R, 1 1 8"LD, 1 2"SD Product Description Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the traditional roundover edge on the side of your workpiece.