Led Tail Trailer Lights Kit, Plug, Number Plate Light, 5 Core Wire, Reflectors Holders SUIT ELECTRIC SETUP

SUIT ELECTRIC SETUP

USE WITH STANDARD COUPLING

2 x MARINE SEAL

39mm x 125mm (5 inch)

CENTRE OF BOLT HOLE TO CENTRE OF BOLT HOLE: 30MM

Led Tail Trailer Lights Kit, Plug, Number Plate Light, 5 Core Wire, Reflectors Holders SUIT ELECTRIC SETUPTail lights Fully submersible Voltage: 12v ADR Approved Dimension: 100mm x 100mm x 22mm Spaces between screws: 70mm Comes with around 30cm cable from the back of light WIRING INSTRUCTIONS: YELLOW WIRE= INDICATOR WHITE WIRE= EARTH BLACK WIRE= TAIL RED WIRE= STOP Note: Kit is NOT wired Cable 5 CORE CABLE 8 METERS QUANTITY: x1 Number of cores = 5 Insulation thickness = . 45 Sheath thickness = . 5 Electrical resistance at 20c (ohm km) = 31 \ Strand Number